Patchcords & Pigtails

Call us » 01342 870 941

Fibre Optic Patchcords & Pigtails

 

The term fibre optic ‘patchcord’ is also refereed to as a Jumper, Jumper cable, Lead, Assembly, Cable, Patch cable and more. They traditionally refer to a length of fibre optic cable which has been terminated at both ends with fibre optic connectors. Their aim is to lose as little light as possible, measured as a decibel (dB) loss or attenuation. All alker patchcords and Pigtails have an insertion loss of 0.3dB or less which equates to less than 1% light loss.

The term ‘pigtail’ traditionally refers to a short length of fibre optic cable with a fibre optic connector at one end and bare fibre at the other.

At alker we offer a range of standard patchcords and pigtails. These utilize common fibre optic connectors and optical fibre including 9/125 OS1 Singlemode, 50/125 OM2 Multimode and 62.5/125 OM1 Multimode and are available in 1,2,3,5 and 10m configurations to suit most installation needs.

If you require a bespoke patchcord or pigtail use our ‘build your own’ service. In 5 easy steps we will guide you through the available choices of 13 fibre optic connectors, 3 optical fibres modes and 5 ruggedisations. Ordering hybrid patchcords or custom fibre optic assemblies online has never been so easy and at no additional premium over our standard patchcord configurations.

If at any stage you need some assistance please call us on 01342 870 941 and we will guide you through.

alker has been operating in the fibre optic field for over 25 years so if you have any requirement outside of our advertised ranges please contact us on 01342 870 941 and we will be happy to talk through your requirements.


« Any Connector | Any Fibre | Any Ruggedisation | Any combination »
+ +

 


Select your standard patchcords and pigtails

« DIN UPC Patchcords »
Single mode 9/125, Multimode 50/125, Multimode 62.5/125
900um, 2mm, 3mm ruggedisation
Simplex or Duplex

 

« E2000 APC Patchcords »
Single mode 9/125, Multimode 50/125, Multimode 62.5/125
900um, 2mm, 3mm ruggedisation
Simplex or Duplex

 

« E2000 UPC Patchcords »
Single mode 9/125, Multimode 50/125, Multimode 62.5/125
900um, 2mm, 3mm ruggedisation
Simplex or Duplex

 

« FC APC WIDE (N) Patchcords »
Single mode 9/125, Multimode 50/125, Multimode 62.5/125
900um, 2mm, 3mm ruggedisation
Simplex or Duplex

 

« FC APC NARROW (R) Patchcords »
Single mode 9/125, Multimode 50/125, Multimode 62.5/125
900um, 2mm, 3mm ruggedisation
Simplex or Duplex

 

« FC UPC Patchcords »

Single mode 9/125, Multimode 50/125, Multimode 62.5/125
900um, 2mm, 3mm ruggedisation
Simplex or Duplex

 

« FDDI UPC Patchcords »
Single mode 9/125, Multimode 50/125, Multimode 62.5/125
2mm, 3mm ruggedisation
Duplex

 

« LC APC Patchcords »
Single mode 9/125, Multimode 50/125, Multimode 62.5/125
900um, 2mm, 3mm ruggedisation
Simplex or Duplex

 

« LC UPC Patchcords »
Single mode 9/125, Multimode 50/125, Multimode 62.5/125
900um, 2mm, 3mm ruggedisation
Simplex or Duplex

 

« SC APC Patchcords »
Single mode 9/125, Multimode 50/125, Multimode 62.5/125
900um, 2mm, 3mm ruggedisation
Simplex or Duplex

 

« SC UPC Patchcords »
Single mode 9/125, Multimode 50/125, Multimode 62.5/125
900um, 2mm, 3mm ruggedisation
Simplex or Duplex

 

« SMA Patchcords »
Single mode 9/125, Multimode 50/125, Multimode 62.5/125
900um, 2mm, 3mm ruggedisation
Simplex or Duplex

 

« ST UPC Patchcords »
Single mode 9/125, Multimode 50/125, Multimode 62.5/125
900um, 2mm, 3mm ruggedisation
Simplex or Duplex

 


Do you need a Patch Panel? alker offer a full range of patch panels Alker Optical Equipment Patch Panels
Do you need an adaptor? alker offer a full range of compatible adaptors Alker Optical Equipment Adaptors

If the product you need is not listed or you need a little technical assistance please contact us and we shall do our best to help you:

Phone number: 01342 870 941
Live Support :
Email us : salesatalkerdotcodotuk


See all our range under the Store and Products menu

Shop now alker Bestsellers